Frequently Asked Question
How to Check for Updates for My Pocket Wizard - Plus III
Last Updated 7 years ago
- Launch the PocketWizard Utility
- Connect your radio to your computer via a Mini-B USB cable
- The connected radio will be displayed in the top left of the Utility window.
- Note the current Firmware Version of the connected radio. If the Firmware Version matches the Current Versions listed below, skip steps X to X and proceed to the next radio.
- Under the Update Tab, click Check for Updates, which will download the latest firmware version, and prompt to update the firmware in the connected radio.
- The Utility will update the firmware in the connected radio. Do not disconnect the radio while the progress bars are visible.
- After the Utility confirms a successful firmware update, disconnect the radio from your computer, and move the power switch off.
- Perform a Factory Reset of your radio, by holding the TEST button as you power on the radio.
- Repeat the above steps for all of your radios, making sure all firmware versions match the Current Versions listed